Settings#
This is the list of (non-toggle) Django settings defined in the common.py modules of edx-platform.
Note
Toggle settings, which enable or disable a specific feature, are documented in the feature toggles section.
LMS settings#
ACCOUNT_MICROFRONTEND_URL#
Default: None
Source: common.py (line 5007)
Base URL of the micro-frontend-based account settings page.
Warning
Also set site’s ENABLE_ACCOUNT_MICROFRONTEND and account.redirect_to_microfrontend waffle flag
BLOCK_STRUCTURES_SETTINGS#
Default: "dict of settings"
Source: common.py (line 2948)
Stores all the settings used by block structures and block structure related tasks. See BLOCK_STRUCTURES_SETTINGS[XXX] documentation for details of each setting. For more information, check https://github.com/openedx/edx-platform/pull/13388.
BLOCK_STRUCTURES_SETTINGS[‘COURSE_PUBLISH_TASK_DELAY’]#
Default: 30
Source: common.py (line 2954)
Delay, in seconds, after a new edit of a course is published before updating the block structures cache. This is needed for a better chance at getting the latest changes when there are secondary reads in sharded mongoDB clusters. For more information, check https://github.com/openedx/edx-platform/pull/13388 and https://github.com/openedx/edx-platform/pull/14571.
BLOCK_STRUCTURES_SETTINGS[‘TASK_DEFAULT_RETRY_DELAY’]#
Default: 30
Source: common.py (line 2963)
Delay, in seconds, between retry attempts if a block structure task fails. For more information, check https://github.com/openedx/edx-platform/pull/13388 and https://github.com/openedx/edx-platform/pull/14571.
BLOCK_STRUCTURES_SETTINGS[‘TASK_MAX_RETRIES’]#
Default: 5
Source: common.py (line 2970)
Maximum number of retries per block structure task. If the maximum number of retries is exceeded, then you can attempt to either manually run the celery task, or wait for it to be triggered again. For more information, check https://github.com/openedx/edx-platform/pull/13388 and https://github.com/openedx/edx-platform/pull/14571.
CCX_MAX_STUDENTS_ALLOWED#
Default: 200
Source: common.py (line 4503)
Maximum number of students allowed in a CCX (Custom Courses for edX), This is an arbitrary hard limit, chosen so that a CCX does not compete with public MOOCs.
CELERY_EXTRA_IMPORTS#
Default: "[]"
Source: common.py (line 2851)
Adds extra packages that don’t get auto-imported (Example: XBlocks). These packages are added in addition to those added by CELERY_IMPORTS.
CODE_JAIL_REST_SERVICE_CONNECT_TIMEOUT#
Default: 0.5
Source: common.py (line 1856)
Set the number of seconds LMS will wait to establish an internal connection to the codejail remote service.
CODE_JAIL_REST_SERVICE_HOST#
Default: "'http://127.0.0.1:8550'"
Source: common.py (line 1852)
Set the codejail remote service host
CODE_JAIL_REST_SERVICE_READ_TIMEOUT#
Default: 3.5
Source: common.py (line 1860)
Set the number of seconds LMS will wait for a response from the codejail remote service endpoint.
CODE_JAIL_REST_SERVICE_REMOTE_EXEC#
Default: "'xmodule.capa.safe_exec.remote_exec.send_safe_exec_request_v0'"
Source: common.py (line 1847)
Set the python package.module.function that is reponsible of calling the remote service in charge of jailed code execution
COMPREHENSIVE_THEME_DIRS#
Default: "[]"
Source: common.py (line 4560)
A list of paths to directories, each of which will be searched for comprehensive themes. Do not override this Django setting directly. Instead, set the COMPREHENSIVE_THEME_DIRS environment variable, using colons (:) to separate paths.
COMPREHENSIVE_THEME_LOCALE_PATHS#
Default: "[]"
Source: common.py (line 4568)
A list of the paths to themes locale directories e.g. “COMPREHENSIVE_THEME_LOCALE_PATHS” : [“/edx/src/edx-themes/conf/locale”].
COURSE_MEMBER_API_ENROLLMENT_LIMIT#
Default: 1000
Source: common.py (line 4377)
This limits the response size of the `get_course_members` API, throwing an exception if the number of Enrolled users is greater than this number. This is needed to limit the dataset size since the API does most of the calculation in Python to avoid expensive database queries.
CUSTOM_RESOURCE_TEMPLATES_DIRECTORY#
Default: None
Source: common.py (line 4599)
Path to an existing directory of YAML files containing html content to be used with the subclasses of xmodule.x_module.ResourceTemplates. Default example templates can be found in xmodule/templates/html. Note that the extension used is “.yaml” and not “.yml”. See xmodule.x_module.ResourceTemplates for usage. “CUSTOM_RESOURCE_TEMPLATES_DIRECTORY” : null
DEFAULT_SITE_THEME#
Default: None
Source: common.py (line 4581)
Theme to use when no site or site theme is defined, for example “dark-theme”. Set to None if you want to use openedx default theme.
Warning
The theme folder needs to be in ‘edx-platform/themes’ or define the path to the theme folder in COMPREHENSIVE_THEME_DIRS. To be effective, ENABLE_COMPREHENSIVE_THEMING has to be enabled.
DISABLED_COUNTRIES#
Default: "[]"
Source: common.py (line 5535)
List of country codes that should be disabled
DISCUSSIONS_MFE_FEEDBACK_URL#
Default: None
Source: common.py (line 5039)
Base URL of the discussions micro-frontend google form based feedback.
DISCUSSIONS_MICROFRONTEND_URL#
Default: None
Source: common.py (line 5034)
Base URL of the micro-frontend-based discussions page.
Warning
Also set site’s courseware.discussions_mfe waffle flag.
EDXNOTES_CLIENT_NAME#
Default: "edx-notes"
Source: common.py (line 2179)
Set the name of the Oauth client used by LMS to authenticate with the edx_notes_api service.
Warning
The Oauth client must be created in the platform Django admin in the path /admin/oauth2_provider/application/, setting the name field of the client as the value of this setting.
EDXNOTES_CONNECT_TIMEOUT#
Default: 0.5
Source: common.py (line 2187)
Set the number of seconds LMS will wait to establish an internal connection to the edx_notes_api service.
EDXNOTES_INTERNAL_API#
Default: "http://localhost:18120/api/v1"
Source: common.py (line 2170)
Set the internal API endpoint LMS will use in the backend to interact with the edx_notes_api service.
Warning
Normally set to the same value of EDXNOTES_PUBLIC_API. It is not mandatory for this setting to be a publicly accessible endpoint, but to be accessible by the LMS service. It is only used when the setting FEATURES[‘ENABLE_EDXNOTES’] is activated.
EDXNOTES_PUBLIC_API#
Default: "http://localhost:18120/api/v1"
Source: common.py (line 2162)
Set the public API endpoint LMS will use in the frontend to interact with the edx_notes_api service.
Warning
This setting must be a publicly accessible endpoint. It is only used when the setting FEATURES[‘ENABLE_EDXNOTES’] is activated.
EDXNOTES_READ_TIMEOUT#
Default: 1.5
Source: common.py (line 2191)
Set the number of seconds LMS will wait for a response from the edx_notes_api service internal endpoint.
ELASTIC_SEARCH_INDEX_PREFIX#
Default: "''"
Source: common.py (line 1456)
Specifies the prefix used when naming elasticsearch indexes related to edx-search.
EVENT_BUS_PRODUCER_CONFIG#
Default: "all events disabled"
Source: common.py (line 5397)
Dictionary of event_types mapped to dictionaries of topic to topic-related configuration. Each topic configuration dictionary contains * `enabled`: a toggle denoting whether the event will be published to the topic. These should be annotated according to https://edx.readthedocs.io/projects/edx-toggles/en/latest/how_to/documenting_new_feature_toggles.html * `event_key_field` which is a period-delimited string path to event data field to use as event key. Note: The topic names should not include environment prefix as it will be dynamically added based on EVENT_BUS_TOPIC_PREFIX setting.
EXAMS_DASHBOARD_MICROFRONTEND_URL#
Default: None
Source: common.py (line 5043)
Base URL of the exams dashboard micro-frontend for instructors.
GRADEBOOK_FREEZE_DAYS#
Default: 30
Source: common.py (line 1096)
Sets the number of days after which the gradebook will freeze following the course’s end.
LEARNING_MICROFRONTEND_URL#
Default: None
Source: common.py (line 5016)
Base URL of the micro-frontend-based courseware page.
LOGIN_REDIRECT_WHITELIST#
Default: "empty list ([])"
Source: common.py (line 3693)
While logout, if logout request has a redirect-url as query strings, then the redirect-url is validated through LOGIN_REDIRECT_WHITELIST.
MAINTENANCE_BANNER_TEXT#
Default: "'Sample banner message'"
Source: common.py (line 1487)
Specifies the text that is rendered on the maintenance banner.
Warning
Depends on the `open_edx_util.display_maintenance_warning` waffle switch. The banner is only rendered when the switch is activated.
MAX_FAILED_LOGIN_ATTEMPTS_ALLOWED#
Default: 6
Source: common.py (line 3826)
Specifies the maximum failed login attempts allowed to users. Once the user reaches this failure threshold then the account will be locked for a configurable amount of seconds (30 minutes) which will prevent additional login attempts until this time period has passed. This setting is related with MAX_FAILED_LOGIN_ATTEMPTS_LOCKOUT_PERIOD_SECS and only used when ENABLE_MAX_FAILED_LOGIN_ATTEMPTS is enabled.
MAX_FAILED_LOGIN_ATTEMPTS_LOCKOUT_PERIOD_SECS#
Default: "30 * 60"
Source: common.py (line 3835)
Specifies the lockout period in seconds for consecutive failed login attempts. Once the user reaches the threshold of the login failure, then the account will be locked for the given amount of seconds (30 minutes) which will prevent additional login attempts until this time period has passed. This setting is related with MAX_FAILED_LOGIN_ATTEMPTS_ALLOWED and only used when ENABLE_MAX_FAILED_LOGIN_ATTEMPTS is enabled.
MFE_CONFIG#
Default: "{}"
Source: common.py (line 5303)
Is a configuration that will be exposed by the MFE Config API to be consumed by the MFEs. Contains configuration common to all MFEs. When a specific MFE’s configuration is requested, these values will be treated as a base and then overriden/supplemented by those in `MFE_CONFIG_OVERRIDES`. Example: { “BASE_URL”: “https://name_of_mfe.example.com”, “LANGUAGE_PREFERENCE_COOKIE_NAME”: “example-language-preference”, “CREDENTIALS_BASE_URL”: “https://credentials.example.com”, “DISCOVERY_API_BASE_URL”: “https://discovery.example.com”, “LMS_BASE_URL”: “https://courses.example.com”, “LOGIN_URL”: “https://courses.example.com/login”, “LOGOUT_URL”: “https://courses.example.com/logout”, “STUDIO_BASE_URL”: “https://studio.example.com”, “LOGO_URL”: “https://courses.example.com/logo.png” }
MFE_CONFIG_API_CACHE_TIMEOUT#
Default: "60*5"
Source: common.py (line 5343)
The MFE Config API response will be cached during the specified time
MFE_CONFIG_OVERRIDES#
Default: "{}"
Source: common.py (line 5324)
Overrides or additions to `MFE_CONFIG` for when a specific MFE is requested by the MFE Config API. Top-level keys are APP_IDs, a.k.a. the name of the MFE (for example, for an MFE named “frontend-app-xyz”, the top-level key would be “xyz”). Example: { “gradebook”: { “BASE_URL”: “https://gradebook.example.com”, }, “profile”: { “BASE_URL”: “https://profile.example.com”, “ENABLE_LEARNER_RECORD_MFE”: “true”, }, }
ORA_GRADING_MICROFRONTEND_URL#
Default: None
Source: common.py (line 5020)
Base URL of the micro-frontend-based openassessment grading page. This is will be show in the open response tab list data.
Warning
Also set site’s openresponseassessment.enhanced_staff_grader waffle flag.
ORA_MICROFRONTEND_URL#
Default: None
Source: common.py (line 5027)
Base URL for modern openassessment app. This is will be show in the open response tab list data.
Warning
Also set site’s openresponseassessment.mfe_views waffle flag.
PLATFORM_NAME#
Default: "Your Platform Name Here"
Source: common.py (line 74)
The display name of the platform to be used in templates/emails/etc.
PREPEND_LOCALE_PATHS#
Default: "[]"
Source: common.py (line 4575)
A list of the paths to locale directories to load first e.g. “PREPEND_LOCALE_PATHS” : [“/edx/my-locales/”].
PROFILE_MICROFRONTEND_URL#
Default: None
Source: common.py (line 5000)
Base URL of the micro-frontend-based profile page.
Warning
Also set site’s ENABLE_PROFILE_MICROFRONTEND and learner_profile.redirect_to_microfrontend waffle flag
RATELIMIT_RATE#
Default: "120/m"
Source: common.py (line 4862)
Due to some reports about attack on /oauth2/access_token/ which took LMS down, this setting was introduced to rate-limit all endpoints of AccessTokenView up to 120 requests per IP Address in a minute by default.
Warning
RATELIMIT_ENABLE flag must also be enabled/set to True to use this RATELIMIT_RATE setting.
REGISTRATION_EXTRA_FIELDS#
Default: "{'confirm_email': 'hidden', 'level_of_education': 'optional', 'gender': 'optional',
'year_of_birth': 'optional', 'mailing_address': 'optional', 'goals': 'optional', 'honor_code': 'required',
'terms_of_service': 'hidden', 'city': 'hidden', 'country': 'hidden'}"
Source: common.py (line 3701)
The signup form may contain extra fields that are presented to every user. For every field, we can specifiy whether it should be “required”: to display the field, and make it mandatory; “optional”: to display the optional field as part of a toggled input field list; “optional-exposed”: to display the optional fields among the required fields, and make it non-mandatory; “hidden”: to not display the field. When the terms of service are not visible and agreement to the honor code is required (the default), the signup page includes a paragraph that links to the honor code page (defined my MKTG_URLS[“HONOR”]). This page might not be available for all Open edX platforms. In such cases, the “honor_code” registration field should be “hidden”.
REGISTRATION_RATELIMIT#
Default: "60/7d"
Source: common.py (line 3447)
New users are registered on edx via RegistrationView. It’s POST end-point is rate-limited up to 60 requests per IP Address in a week by default. Purpose of this setting is to restrict an attacker from registering numerous fake accounts.
REGISTRATION_VALIDATION_RATELIMIT#
Default: "30/7d"
Source: common.py (line 3438)
Whenever a user tries to register on edx, the data entered during registration is validated via RegistrationValidationView. It’s POST endpoint is rate-limited up to 30 requests per IP Address in a week by default. It was introduced because an attacker can guess or brute force a series of names to enumerate valid users.
RETIRED_EMAIL_DOMAIN#
Default: "retired.invalid"
Source: common.py (line 4907)
Set the domain part of hashed emails for retired users. Used by the derived setting RETIRED_EMAIL_FMT.
RETIRED_EMAIL_FMT#
Default: "retired__user_{}@retired.invalid"
Source: common.py (line 4918)
Set the format a retired user email field gets transformed into, where {} is replaced with the hash of the original email. This is a derived setting that depends on RETIRED_EMAIL_PREFIX and RETIRED_EMAIL_DOMAIN values.
RETIRED_EMAIL_PREFIX#
Default: "retired__user_"
Source: common.py (line 4902)
Set the prefix part of hashed emails for retired users. Used by the derived setting RETIRED_EMAIL_FMT.
RETIRED_USERNAME_FMT#
Default: "retired__user_{}"
Source: common.py (line 4912)
Set the format a retired user username field gets transformed into, where {} is replaced with the hash of the original username. This is a derived setting that depends on RETIRED_USERNAME_PREFIX value.
RETIRED_USERNAME_PREFIX#
Default: "retired__user_"
Source: common.py (line 4896)
Set the prefix part of hashed usernames for retired users. Used by the derived setting RETIRED_USERNAME_FMT.
RETIRED_USER_SALTS#
Default: "['abc', '123']"
Source: common.py (line 4925)
Set a list of salts used for hashing usernames and emails on users retirement.
Warning
Only the last item in this list is used as a salt for all new retirements, but historical salts are preserved in order to guarantee that all hashed usernames and emails can still be checked.
RETIREMENT_SERVICE_WORKER_USERNAME#
Default: "RETIREMENT_SERVICE_USER"
Source: common.py (line 4932)
Set the username of the retirement service worker user. Retirement scripts authenticate with LMS as this user with oauth client credentials.
RETIREMENT_STATES#
Default: "[
'PENDING',
'LOCKING_ACCOUNT',
'LOCKING_COMPLETE',
'RETIRING_FORUMS',
'FORUMS_COMPLETE',
'RETIRING_EMAIL_LISTS',
'EMAIL_LISTS_COMPLETE',
'RETIRING_ENROLLMENTS',
'ENROLLMENTS_COMPLETE',
'RETIRING_NOTES',
'NOTES_COMPLETE',
'RETIRING_LMS',
'LMS_COMPLETE',
'ERRORED',
'ABORTED',
'COMPLETE',
]"
Source: common.py (line 4938)
Set a list that defines the name and order of states for the retirement workflow.
Warning
These states are stored in the database and it is the responsibility of the administrator to populate the state list since the states can vary across different installations. There must be, at minimum, a PENDING state at the beginning, and COMPLETED, ERRORED, and ABORTED states at the end of the list.
SECURITY_PAGE_URL#
Default: None
Source: common.py (line 3497)
A link to the site’s security disclosure/reporting policy, to display in the site footer. This will only appear for sites using themes that use the links produced by ``lms.djangoapps.branding.api.get_footer``.
SURVEY_REPORT_CHECK_THRESHOLD#
Default: "every 6 months"
Source: common.py (line 5525)
Survey report banner will appear if a survey report is not sent in the months defined.
SURVEY_REPORT_ENDPOINT#
Default: "Open edX organization endpoint"
Source: common.py (line 5514)
Endpoint where the report will be sent.
SURVEY_REPORT_EXTRA_DATA#
Default: "empty dictionary"
Source: common.py (line 5529)
Dictionary with additional information that you want to share in the report.
WEBPACK_CONFIG_PATH#
Default: ""webpack.prod.config.js""
Source: common.py (line 2827)
Path to the Webpack configuration file. Used by Paver scripts.
Warning
This Django setting is DEPRECATED! Starting in Sumac, Webpack will no longer use Django settings. Please set the WEBPACK_CONFIG_PATH environment variable instead. For details, see: https://github.com/openedx/edx-platform/issues/31895
XBLOCK_EXTRA_MIXINS#
Default: "()"
Source: common.py (line 1667)
Custom mixins that will be dynamically added to every XBlock and XBlockAside instance. These can be classes or dotted-path references to classes. For example: `XBLOCK_EXTRA_MIXINS = (‘my_custom_package.my_module.MyCustomMixin’,)`
XBLOCK_FIELD_DATA_WRAPPERS#
Default: "()"
Source: common.py (line 1674)
Paths to wrapper methods which should be applied to every XBlock’s FieldData.
XBLOCK_RUNTIME_V2_EPHEMERAL_DATA_CACHE#
Default: "default"
Source: common.py (line 1690)
The django cache key of the cache to use for storing anonymous user state for XBlocks.
XBLOCK_SETTINGS#
Default: "{}"
Source: common.py (line 1682)
Dictionary containing server-wide configuration of XBlocks on a per-type basis. By default, keys should match the XBlock `block_settings_key` attribute/property. If the attribute/property is not defined, use the XBlock class name. Check `xmodule.services.SettingsService` for more reference.
CMS settings#
CODE_JAIL_REST_SERVICE_CONNECT_TIMEOUT#
Default: 0.5
Source: common.py (line 1194)
Set the number of seconds CMS will wait to establish an internal connection to the codejail remote service.
CODE_JAIL_REST_SERVICE_HOST#
Default: "'http://127.0.0.1:8550'"
Source: common.py (line 1190)
Set the codejail remote service host
CODE_JAIL_REST_SERVICE_READ_TIMEOUT#
Default: 3.5
Source: common.py (line 1198)
Set the number of seconds CMS will wait for a response from the codejail remote service endpoint.
CODE_JAIL_REST_SERVICE_REMOTE_EXEC#
Default: "'xmodule.capa.safe_exec.remote_exec.send_safe_exec_request_v0'"
Source: common.py (line 1185)
Set the python package.module.function that is reponsible of calling the remote service in charge of jailed code execution
COMPREHENSIVE_THEME_DIRS#
Default: "[]"
Source: common.py (line 2188)
A list of paths to directories, each of which will be searched for comprehensive themes. Do not override this Django setting directly. Instead, set the COMPREHENSIVE_THEME_DIRS environment variable, using colons (:) to separate paths.
COMPREHENSIVE_THEME_LOCALE_PATHS#
Default: "[]"
Source: common.py (line 2196)
See LMS annotation. “COMPREHENSIVE_THEME_LOCALE_PATHS” : [“/edx/src/edx-themes/conf/locale”].
CUSTOM_RESOURCE_TEMPLATES_DIRECTORY#
Default: None
Source: common.py (line 2221)
Path to an existing directory of YAML files containing html content to be used with the subclasses of xmodule.x_module.ResourceTemplates. Default example templates can be found in xmodule/templates/html. Note that the extension used is “.yaml” and not “.yml”. See xmodule.x_module.ResourceTemplates for usage. “CUSTOM_RESOURCE_TEMPLATES_DIRECTORY” : null
DEFAULT_GRADE_DESIGNATIONS#
Default: "['A', 'B', 'C', 'D']"
Source: common.py (line 2430)
The default ‘pass’ grade cutoff designations to be used. The failure grade is always ‘F’ and should not be included in this list.
Warning
The DEFAULT_GRADE_DESIGNATIONS list must have more than one designation, or else [‘A’, ‘B’, ‘C’, ‘D’] will be used as the default grade designations. Also, only the first 11 grade designations are used by the UI, so it’s advisable to restrict the list to 11 items.
DEFAULT_SITE_THEME#
Default: None
Source: common.py (line 2208)
See LMS annotation.
DISABLED_COUNTRIES#
Default: "[]"
Source: common.py (line 2940)
List of country codes that should be disabled
EVENT_BUS_PRODUCER_CONFIG#
Default: "all events disabled"
Source: common.py (line 2834)
Dictionary of event_types mapped to dictionaries of topic to topic-related configuration. Each topic configuration dictionary contains * `enabled`: a toggle denoting whether the event will be published to the topic. These should be annotated according to https://edx.readthedocs.io/projects/edx-toggles/en/latest/how_to/documenting_new_feature_toggles.html * `event_key_field` which is a period-delimited string path to event data field to use as event key. Note: The topic names should not include environment prefix as it will be dynamically added based on EVENT_BUS_TOPIC_PREFIX setting.
GIT_EXPORT_DEFAULT_IDENT#
Default: "{'name': 'STUDIO_EXPORT_TO_GIT', 'email': 'STUDIO_EXPORT_TO_GIT@example.com'}"
Source: common.py (line 1237)
When courses are exported to git, commits are signed with this name/email git identity.
GIT_REPO_EXPORT_DIR#
Default: "'/edx/var/edxapp/export_course_repos'"
Source: common.py (line 1231)
When courses are exported to git, either with the export_git management command or the git export view from the studio (when FEATURES[‘ENABLE_EXPORT_GIT’] is True), they are stored in this directory, which must exist at the time of the export.
JS_ENV_EXTRA_CONFIG#
Default: "{}"
Source: common.py (line 1318)
JavaScript code can access this dictionary using `process.env.JS_ENV_EXTRA_CONFIG` One of the current use cases for this is enabling custom TinyMCE plugins (TINYMCE_ADDITIONAL_PLUGINS) and overriding the TinyMCE configuration (TINYMCE_CONFIG_OVERRIDES).
Warning
This Django setting is DEPRECATED! Starting in Sumac, Webpack will no longer use Django settings. Please set the JS_ENV_EXTRA_CONFIG environment variable to an equivalent JSON string instead. For details, see: https://github.com/openedx/edx-platform/issues/31895
PREPEND_LOCALE_PATHS#
Default: "[]"
Source: common.py (line 2202)
A list of the paths to locale directories to load first e.g. “PREPEND_LOCALE_PATHS” : [“/edx/my-locales/”].
STUDIO_NAME#
Default: "Your Platform Studio"
Source: common.py (line 177)
The name that will appear on the landing page of Studio, as well as in various emails and templates.
WEBPACK_CONFIG_PATH#
Default: ""webpack.prod.config.js""
Source: common.py (line 1509)
Path to the Webpack configuration file. Used by Paver scripts.
Warning
This Django setting is DEPRECATED! Starting in Sumac, Webpack will no longer use Django settings. Please set the WEBPACK_CONFIG_PATH environment variable instead. For details, see: https://github.com/openedx/edx-platform/issues/31895
XBLOCK_EXTRA_MIXINS#
Default: "()"
Source: common.py (line 1003)
Custom mixins that will be dynamically added to every XBlock and XBlockAside instance. These can be classes or dotted-path references to classes. For example: `XBLOCK_EXTRA_MIXINS = (‘my_custom_package.my_module.MyCustomMixin’,)`
XBLOCK_RUNTIME_V2_EPHEMERAL_DATA_CACHE#
Default: "default"
Source: common.py (line 1013)
The django cache key of the cache to use for storing anonymous user state for XBlocks.